WARNING: This may or may not work. You are going to need the item that caused it in the first place. Instructions on building it in the first place are below. BACK UP THE PROFILE BEFOREHAND INCASE IT GETS WORSE AND FAILS!!!!!! You need to do this with the account that is glitched, or else it won't work.
First, you need to build the glitch item...
1. Enter Create Mode.
2. Open Popit, select the Goodies bag and then select the cardboard material.
3. Leave the material at it's default scale and make it thin (R2 button).
4. Move the material so it is on the second thin layer from the front (L1 and L2 button).
5. Place the material into the level.
6. Place a bolt (selected from the Tools bag) in the centre of the cardboard material (you will notice the bolt will slightly 'snap' to the centre when you're close.
7. Select a Controlinator (from the tools bag).
8. Place the controlinator in the bottom right corner of the block of material. When doing this the top left corner of the controlinator should intersect the bolt.
Optional Step 9. Capture the object so you don't need to recreate it everytime, incase it doesn't work the first time.
Now that you have the item....
1. Bolt yourself to the cardboard
2. Get into the controlinator again and click on it with the popit cursor but DO NOT make yourself big or small, just leave it, and after that you should be stuck to the controlinator
3. Turn your controller to controller 2 and then wait until your first sackboy that is bolted to the cardboard disappears.
4. Turn your controller back to controller number 1. You should notice that the bolt is missing from the cardboard and your costume you were wearing is gone.
5. Delete the cardboard!
6. Save!!!!!!
7. Try to go to Rookie Test by Da Vinci. If it is fixed you should spawn out of the checkpoint in the first part of the level.
I hope this works!
-Iamgoofball
First, you need to build the glitch item...
1. Enter Create Mode.
2. Open Popit, select the Goodies bag and then select the cardboard material.
3. Leave the material at it's default scale and make it thin (R2 button).
4. Move the material so it is on the second thin layer from the front (L1 and L2 button).
5. Place the material into the level.
6. Place a bolt (selected from the Tools bag) in the centre of the cardboard material (you will notice the bolt will slightly 'snap' to the centre when you're close.
7. Select a Controlinator (from the tools bag).
8. Place the controlinator in the bottom right corner of the block of material. When doing this the top left corner of the controlinator should intersect the bolt.
Optional Step 9. Capture the object so you don't need to recreate it everytime, incase it doesn't work the first time.
Now that you have the item....
1. Bolt yourself to the cardboard
2. Get into the controlinator again and click on it with the popit cursor but DO NOT make yourself big or small, just leave it, and after that you should be stuck to the controlinator
3. Turn your controller to controller 2 and then wait until your first sackboy that is bolted to the cardboard disappears.
4. Turn your controller back to controller number 1. You should notice that the bolt is missing from the cardboard and your costume you were wearing is gone.
5. Delete the cardboard!
6. Save!!!!!!
7. Try to go to Rookie Test by Da Vinci. If it is fixed you should spawn out of the checkpoint in the first part of the level.
I hope this works!
-Iamgoofball